Our anodised aluminium has an attractive black finish achieved through an electrochemical process. Anodising is a highly controlled oxidation, resulting in a finish that is durable and corrosion-resistant. The aluminium is sand-blasted before being anodised, to create a subtle texture.

 

It is important to keep the surface clean, washing regularly with water and a mild soap, always rinsing thoughly and drying with a soft cloth. Regular cleaning in this way will prevent the build up of contaminates which can cause the surface to deteriorate. NEVER use coarse abrasives such as sandpaper or steel or brass wool. NEVER use bleach, chlorides, cream cleaners, or concentrated alkaline base solutions.

Brass is an alloy of copper and zinc, with an attractive gold-like colour. Naval brass is premium grade, with the addition of 1% tin, which increases its resistance to corrosion while providing a stronger structure. The surface is uncoated to embrace the natural patina that will develop over time.

 

Brass has a tendency to oxidise quickly when exposed to air or direct contact with skin. Our brass is uncoated to embrace the oxidisation and resulting patina as a natural and beautiful part of the life of the brass product. As such, we do not recommend polishing. If however if you prefer to remove the patina, it is important to regularly brush your brass with a fine grit (360 grit) abrasive brushing pad such as a Mirka Mirlon Finishing Pad. It is very important to always wipe in the direction of the grain of the brushed surface. After brushing, use a non-agressive, multipurpose cleaning solvent to degrease the product such as CT1 Multi-Solve, applied with a clean soft cloth following the grain direction. Do NOT use ammonia, products containing ammonia, or any other corrosive cleaning solutions as this can damage the brass.

Brass is an alloy of copper and zinc, with an attractive gold-like colour. Naval brass is premium grade, with the addition of 1% tin, which increases its resistance to corrosion while providing a stronger structure.  The surface is uncoated to embrace the natural patina that will develop over time. 

 

Brass has a tendency to oxidise quickly when exposed to air or direct contact with skin. Our brass is uncoated to embrace the oxidisation and resulting patina as a natural and beautiful part of the life of the brass product. As such, we do not recommend polishing. If however if you prefer to remove the patina, it is important to clean the brass using a brass polish such as Brasso, and to clean the entire surface at once. After cleaning, use a non-agressive, multipurpose cleaning solvent to degrease the product such as CT1 Multi-Solve, applied with a clean soft cloth. Do NOT use abrasives, ammonia, products containing ammonia, or any other corrosive cleaning solutions as this can damage the brass. Prevention is the best protection against surface scratches.