Maintenance Information
General information
Pill Lamp
Model
261
Producer
De La Espada
Designer
Autoban
Specifications
Available in gold-plated or chrome-plated steel. Gold plating is 24 karat. Bulb E14 Edison screw, maximum 60W. Bulb not included. 261S is a wall sconce that must be hardwired to the electrics. 261M and 261L are tabletop lamps which have a power cable with non-dimmable switch.
Size
261S - wall
D18 × H20.5 cm
D7 1/8 × H8 ”
261M - rounded base
D18 × H30.5 cm
D7 1/8 × H12 1/8 ”
261L - flat base
D18 × H32 cm
D7 1/8 × H12 3/5 ”
Delivery time
9-11 weeks
Attachment(s) (pdf)
Looking_After_Your_Furniture_25112015 (1)35.pdf
Steel Chrome-Plated
Our chrome finish consists of a welded steel frame plated with chrome. The steel frame provides a stable framework while the chrome plating creates a desirably shiny and smooth finish.
For regular cleaning, first remove dust with a feather duster or similar. Use Windex or similar spray cleaner, followed by a soft, lint free cloth. For superficial oxidisation and tarnishing, please use the following procedure: Apply a small amount (approximately one teaspoon) of Plaster of Paris to a soft clean cloth. Use the cloth to rub the plaster into the metal surface. Continue rubbing until all dirt and tarnish is removed. Wipe the excess with a soft clean cloth. If further cleaning is desired, a soft polishing cloth made specifically for Chrome may be used. Avoid using abrasive polishing cloths as they may damage the surface. NEVER use harsh abrasives, bleach or cream cleaners. The best protection against surface scratches is prevention.
Steel Gold-Plated
Our gold-plated finish consists of a welded steel frame plated with gold, with the exception of the Pumpkin tabletop, which is solid brass, plated with gold. The gold finish is smooth and luxurious and requires specific care.
For regular cleaning, first remove dust with a feather duster or similar. Use Windex or similar spray cleaner, followed by a soft, lint free cloth. Over time, the surface may become dull. To restore shine, please use the following procedure: Apply a small amount (approximately one teaspoon) of Plaster of Paris to a soft clean cloth. Use the cloth to rub the plaster into the metal surface. Continue rubbing until shine is restored. Wipe the excess with a soft clean cloth. If further cleaning is desired, a soft polishing cloth made specifically for gold may be used. Avoid using abrasive polishing cloths as they may damage the surface. NEVER use harsh abrasives, bleach or cream cleaners. Note that gold-plating is a very thin layer - 200 times thinner than standard printer paper - so the use of abrasives over time can remove the plating, revealing the steel underneath. The best protection against surface scratches is prevention.
